ATCOM AXE-800P Manual do Utilizador descarregar pdf (Página 10)

www.atcom.cn 9

Chapter 4 Software Configuration

1. Please check if the AX-800P driver has been loaded successfully, run cat /proc/interrupts

command and you should see one line with wctdm.

If you can not see wctdm, you can try to poweroff your server and replug AX-800P into

another PCI slot.

2. Please use the “dahdi_genconf” command to configure the /etc/dahdi/system.conf file and

generate /etc/asterisk/dahdi-channels.conf file.

[root@localhost ~]# dahdi_genconf

It does not show any output if dahdi_genconf runs successfully.

system.conf

----------------------------------------------------------------------------------------------------------------

# Span 1: WCTDM/16 "Wildcard TDM400P REV E/F Board 17" (MASTER)

fxsks=1

echocanceller=mg2,1

fxsks=2

echocanceller=mg2,2

fxsks=3

echocanceller=mg2,3

fxsks=4

echocanceller=mg2,4

fxsks=5

echocanceller=mg2,5

fxsks=6

echocanceller=mg2,6

fxsks=7

echocanceller=mg2,7

fxsks=8

# Global data

loadzone = us (According to your country)

defaultzone = us (According to your country)

----------------------------------------------------------------------------------------------------------------

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Sem comentários

ATCOM AXE-800P Manual do Utilizador Página 10